Hi, I’m a XOD newbe and using version 0.22.0 Using a simple connection with the sensor AM2302. The Arduino sketch in the IDE is working fine and shows a correct temperature. A simple project in XOD does not work and show 0.00 °C. The wireing wasn’t changed. What did I wrong in XOD? (The Data pin …

I’m not an expert,but I would try connect the ‘done’ output of the sensor to the ‘update’ input of the display

The hordware has only 3 connection pins: gnd, vcc and data.

Jeff was referring to the pins in the XOD patch. Since Display is probably defaulting to “continuously”, it probably won’t make a difference.

Do you have DHT22 by Seeed Studio? If so, we have a bug #1110 which we can’t reproduce. Looks like there are slight differences in DHT22’s and the one by Seeed is not handled correctly by the node.

I think it’s from keyes. The problem is similiar to bug #1110. I made an Arduino sketch in the IDE, I used the same devices (I2C LCD and DHT22 and used the same port (D2) en it’s working fine with the sketch With XOD the lcd gives for both temp and humidity a value of 0.00 I also, as test, disconn…

I have the same problem with a ds18b20 temp sensor the output only shows 0 deg with a lcd and a watch node

Thank you so much for the help After trying many patches i did find that a dht11 and ds18b20 also would not work until i hooked them to d8 and 9 and gave them a 1 hz tick on update line They do not work on the lower pwm pins.

Temperature sensor AM2302 DHT22 not working

cesars January 6, 2019, 2:46pm 8

try this DHT22 on I²C Led display only sends ERR (reads 0.00)

Topic		Replies	Views
Problem with DHT22 (AM2302) Grove	22	2958	September 27, 2019
DHT22 on I²C Led display only sends ERR (reads 0.00)	3	1116	December 22, 2018
OLED DISPLAY with XOD XOD Programming Questions	4	803	June 5, 2021
DHT-11 and DHT-22 not working at all!	25	5359	May 19, 2019
DHT11 showing correct values in the Arduino IDE but 0 values in XOD	12	2454	October 18, 2018

Temperature sensor AM2302 DHT22 not working

Related topics