RGBLCDI2C-5 button shield A short description of the node as it should be seen in the docs A five button 5 color 2x 16 or (4x 20) I2C node using library’s // include the library code: #include <Wire.h> #include <Adafruit_RGBLCDShield.h> #include <utility/Adafruit_MCP23017.h> // These #defines m…

I have loaded several librarys including yours but when i load the lib cesars/rgblcd i am still getting the previous error

library/various has no version latest library/various has no version latest library/various has no version latest

Can you try another one now? I will upload a higher version, to see if it is solved v0.0.6 [image]

I am still getting the same error with cesars/rgblcd I was able to install your 8 bit register with no problem

it shows up as rev 0.0.6 after I type it in but gives the same error

[image] Good morning, Thank you for your help on this. I have rebooted,tried it on another computer and loaded your entire set of nodes they all loaded except The “cesars/3-digit-multiplex-7seg” and “cesars/rgblcd” The error i got for the 2 is similar but not exactly the same. I have included a s…

[image] xodgod: “cesars/3-digit-multiplex-7seg” This library is not working, I recommend the following of Bitrex [image] Generalized 7 segment LED display driver Look What I’ve Done This is a set of patches for driving common-cathode 7 segment LED numerical display …

[Found%20it] I was able to get the file from Github and loaded it but when XOD loads it gives the error but the file showed up and found the error in the color node expanded to the if-else-v, I do not have a multiple input if-else-v, the only one i have is the single input node on the image

[I want a node] RGB LCD I2C Adafruit 5 Button shield

Hardware Interfacing Questions

cesars January 22, 2019, 3:24pm 12

This library is not working, I recommend the following of Bitrex

look for the __lib__ folder inside XOD in Documents, copy this github folder in cesars folder, or another new folder.
https://github.com/Cesar-S/rgblcd/tree/master/rgblcd

You can capture with ImprPrint key and then paste and edit in Paint or other software.

Topic		Replies	Views
Node for Grove LCD RGB Backlight V4.0 Hardware Interfacing Questions	3	877	June 28, 2020
Send bytes thrugh the digital pins	21	2804	May 18, 2021
0.96 Inch 4Pin White IIC I2C OLED Display For Arduino Hardware Interfacing Questions	88	5588	May 26, 2020
XOD New Node's Creation	5	494	February 19, 2020
Taking experimental requests: to convert Arduino IDE libraries	35	3611	August 24, 2019

[I want a node] RGB LCD I2C Adafruit 5 Button shield

Related topics