Multiple OLED screens

[wayland]

@tbollenb3 I’d also recommend the XOD graphics library. Whichever library you use, your OLEDs will need different I2C addresses. SSD1306 displays often have jumpers on the reverse for changing the I2C address. Alternatively you could use an I2C multiplexer:

TCA9548A - 7ch i2C expander

Looking at this example you don’t actually need a node / library. you could try to use the standard i2c nodes (begin-transmission + write-byte) to send the signals you require to toggle the outputs. Give it a go, good luck.