[Screenshot%20from%202019-10-14%2009-05-282222] [Screenshot%20from%202019-10-14%2009-05-31222] [Screenshot%20from%202019-10-14%2009-05-28] I’m trying to create a GSM patch but XOD keep throwing me errors. Can anyone help? Thanks in advance.

We aren’t likely to be able to help without knowing what the errors are…

This is the error: Compilation failed Command /opt/XOD\ IDE/resources/arduino-cli --config-file=/tmp/arduino-cli5xSgvD/.cli-config.yml compile --fqbn arduino:avr:nano:cpu=atmega328old --verbose /tmp/xod_temp_sketchbookpRxNSF/xod_1571018677266_sketch failed with code 1 The generated C++ code conta…

look [image] Powerful IoT Device Without Coding Look What I’ve Done Greetings! Check out my new story on how to make a simple IoT device using XOD: And the new library for working with SIMCOM family modules: https://xod.io/libs/gabbapeople/sim7020/

I’ve been summoned quang-huy ! Apparently that you’re trying to send SMS text message to a mobile phone. I have not tried but the sequence of commands seems clear. Try to use the gabbapeople/sim7020 library: Set sending to the text mode. AT+CMGF=1 Module answers OK Send SMS to the mobile numbe…

Thanks a lot gabbapeople! I have tried your patch, although I still got this error: Compilation failed Command /opt/XOD\ IDE/resources/arduino-cli --config-file=/tmp/arduino-clibKNpAY/.cli-config.yml compile --fqbn arduino:avr:nano:cpu=atmega328old --verbose /tmp/xod_temp_sketchbook37lrDS/xod_157…

[image] quang-huy: The original compiler error message is above. You are only posting the last part that doesn’t include the actual error message. You need to scroll up to see the original error message.

Which patch exactly do you want to test? That one that is stored at you xodball Mai1 (1).xodball with the sms name cannot be compiled as it is absolutely not finished. Try to assemble the patch from the screenshot that I attached and compile it.

Here it is: Begin compiling code for the board Arduino Nano :package: Using board ‘nano’ from platform in folder: /home/lehuy/xod/packages/packages/arduino/hardware/avr/1.6.21 Using core ‘arduino’ from platform in folder: /home/lehuy/xod/packages/packages/arduino/hardware/avr/1.6.21 Detecting li…

I have recreate that exactly and get an error about Serial1 not being declared, I’m starting to wondering that instead of uart-1 I should have use uart-soft because that’s how I understand it to work with TX, RX and all of that good stuff.

[image] quang-huy: ‘Serial1’ was not declared in this scope state->uart = new (state->mem) HardwareUart(Serial1, (uint32_t)getValue<input_BAUD>(ctx)); the error is here in Serial1

Error while using the uart library

Uncategorized

cesars October 14, 2019, 4:52am 4

look

Topic		Replies	Views
Compilation Error - Sending Text to a PC From Arduino Uncategorized	10	1970	May 13, 2019
Xod 35.0 soft uart fail Install/Upload Problems	5	646	September 15, 2020
Nano Every upload issue Install/Upload Problems	7	2005	August 19, 2020
Soft-uart, uart, won't compile Uncategorized	5	799	January 14, 2020
Help adding Seeeduino XIAO (SAMD21) to XOD supported devices (Updated, looking for @dev help) Install/Upload Problems	13	3469	June 12, 2020

Error while using the uart library

Related topics