# LiquidCrystal.h is not found

**URL:** <https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259>\
**Category:** Install/Upload Problems\
**Created:** [June 10, 2021, 4:58pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259 "2021-06-10T16:58:39Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikerbrowne](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@mikerbrowne](https://forum.xod.io/u/mikerbrowne)\
**Post date:** [June 10, 2021, 4:58pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/1 "2021-06-10T16:58:39Z")

</div>

Hi All,  
I created solar-water-pump-cotroller project last year for a solar heating system for an inflatable hot-tub. It was written using IDE 0.36.1 and all works well, but I now need to make some amendments and change some variables. When I try to create a simulation using 0.36.1 and a version of my project which enables this to be done easily, I get the error message in the title of this post. See attached screenshot for complete message.

The project was created entirely using standard nodes, i.e. no external libraries, so I am baffled as to why this is happening as both my simulation version and the final loaded version worked without any such errors.

I have downloaded IDE 0.38.0 and tried again but get the same error message.

Any help would be greatly appreciated.

[Complete system V4.1.2debug.xodball](https://forum.xod.io/uploads/short-url/uUVzjKH9Ar5xkW13kDEw4XRdmJX.xodball) (71.9 KB)

 ![Screenshot 2021-06-10 171451](https://canada1.discourse-cdn.com/flex027/uploads/xod/original/2X/0/04063e260543d33407acc757a9e117ab117b8ce8.jpeg)

---

<div class="post-metadata">

**Author:** ![danya](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@danya](https://forum.xod.io/u/danya)\
**Post date:** [June 10, 2021, 5:57pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/2 "2021-06-10T17:57:12Z")

</div>

[https://xod.io/docs/guide/wrapping-arduino-libraries/](https://xod.io/docs/guide/wrapping-arduino-libraries/)  
This can help.

---

<div class="post-metadata">

**Author:** ![mikerbrowne](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@mikerbrowne](https://forum.xod.io/u/mikerbrowne)\
**Post date:** [June 10, 2021, 6:17pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/3 "2021-06-10T18:17:08Z")

</div>

Thank you Danya for getting back to me so quickly. I did check this out before posting but I know nothing about programming in C++, so was hoping there will be a solution I can deal with.

Equally, I need to understand why that library has dissappeared since I first created my project.

---

<div class="post-metadata">

**Author:** ![danya](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@danya](https://forum.xod.io/u/danya)\
**Post date:** [June 10, 2021, 6:40pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/4 "2021-06-10T18:40:19Z")

</div>

Try downloading it to the board through debug mode, not through simulation.

---

<div class="post-metadata">

**Author:** ![gweimer](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@gweimer](https://forum.xod.io/u/gweimer)\
**Post date:** [June 12, 2021, 8:57pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/5 "2021-06-12T20:57:00Z")

</div>

You can’t use simulation mode with hardware (like LCD). The simulator has no way of dealing with that. You can replace LCD with watch node to test the rest of your code using simulation, but other hardware (like buttons and sensors) need too be replaced also (tweak nodes can be used to stimulate input).

---

<div class="post-metadata">

**Author:** ![mikerbrowne](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@mikerbrowne](https://forum.xod.io/u/mikerbrowne)\
**Post date:** [June 12, 2021, 9:55pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/6 "2021-06-12T21:55:21Z")

</div>

Hello Gweimer,  
Thank you for your response and yes, I found a previous post of yours on the same topic. I then realised my mistake and having removed the display bits from the simulator version everything worked OK. Lessons learned the hard way are never forgotten! 😉

---

<div class="post-metadata">

**Author:** ![mikerbrowne](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@mikerbrowne](https://forum.xod.io/u/mikerbrowne)\
**Post date:** [June 12, 2021, 9:57pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/7 "2021-06-12T21:57:33Z")

</div>

Thanks for your interest Danya. The answer lay in Gweimer’s post below. (above!) 😁

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/xod/original/1X/eb7348baa04192c2ef932d1db54d44f09f8a7888.png) [@system](https://forum.xod.io/u/system)\
**Post date:** [July 12, 2021, 9:58pm UTC](https://forum.xod.io/t/liquidcrystal-h-is-not-found/5259/8 "2021-07-12T21:58:09Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
