# Import code Arduino IDE in XOD

**URL:** <https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852>\
**Category:** Uncategorized\
**Created:** [November 17, 2019, 5:56pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852 "2019-11-17T17:56:55Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![moi-yashik2](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/moi-yashik2/32/1764_2.png) [@moi-yashik2](https://forum.xod.io/u/moi-yashik2)\
**Post date:** [November 17, 2019, 5:56pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/1 "2019-11-17T17:56:55Z")

</div>

Tell me, can I in XOD import code written in Arduino IDE or only written in C+ ?(“ot-implemented-in-xcode”) Example: not enough “deep sleep” function for ESP8266, and not enough knowledge to write a library in C+ for XOD. Xod is a great project, but importing third-party Arduino libraries into it is very difficult without C+knowledge.

---

<div class="post-metadata">

**Author:** ![rackhacker](https://avatars.discourse-cdn.com/v4/letter/r/ecccb3/32.png) [@rackhacker](https://forum.xod.io/u/rackhacker)\
**Post date:** [November 20, 2019, 6:56pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/2 "2019-11-20T18:56:34Z")

</div>

anything on this? I’m in the same boat

---

<div class="post-metadata">

**Author:** ![fghfbhjkvjbhhjkgxzhh](https://avatars.discourse-cdn.com/v4/letter/f/958977/32.png) [@fghfbhjkvjbhhjkgxzhh](https://forum.xod.io/u/fghfbhjkvjbhhjkgxzhh)\
**Post date:** [December 18, 2019, 1:45pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/3 "2019-12-18T13:45:00Z")

</div>

have you seen the documentation?

---

<div class="post-metadata">

**Author:** ![c2death](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@c2death](https://forum.xod.io/u/c2death)\
**Post date:** [December 21, 2019, 6:14pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/4 "2019-12-21T18:14:46Z")

</div>

[https://xod.io/libs/c2death/c2death-nodes-nodemcu/](https://xod.io/libs/c2death/c2death-nodes-nodemcu/) - deep sleep module for esp8266

---

<div class="post-metadata">

**Author:** ![c2death](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@c2death](https://forum.xod.io/u/c2death)\
**Post date:** [December 21, 2019, 6:30pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/5 "2019-12-21T18:30:15Z")

</div>

Написал модуль сам, работает исправно. Для пробуждения не забыть gpio16 на резет ножку закоротить (D0 нога написано на nodemcu, крайняя с одной из сторон))

---

<div class="post-metadata">

**Author:** ![moi-yashik2](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/moi-yashik2/32/1764_2.png) [@moi-yashik2](https://forum.xod.io/u/moi-yashik2)\
**Post date:** [December 21, 2019, 6:42pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/6 "2019-12-21T18:42:36Z")

</div>

Спасибо Вам, как то, чего так не хватало для моих проектов.

---

<div class="post-metadata">

**Author:** ![c2death](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@c2death](https://forum.xod.io/u/c2death)\
**Post date:** [December 21, 2019, 7:14pm UTC](https://forum.xod.io/t/import-code-arduino-ide-in-xod/2852/7 "2019-12-21T19:14:50Z")

</div>

Мне тоже не хватало, пришлось разработать) теперь не хватает прошивки по воздуху OTA ) занимаюсь этим…