# Good old uploading issues **URL:** \ **Category:** Uncategorized\ **Created:** [November 24, 2020, 11:29pm UTC](https://forum.xod.io/t/good-old-uploading-issues/4639 "2020-11-24T23:29:51Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [November 24, 2020, 11:29pm UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/1 "2020-11-24T23:29:51Z")
Good day friends - wonder if any one can help i have a issues uploading from xod to arduino uno 1. i have two separate identical arduino boards on different computers set up exactly the same , with same problem 2. cables are fine 3. both boards upload easy from standard arduino ide 4. correct ports and boards selected ( uno ) the error Xod is giving me is the following , please help trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 warning: espcomm\_sync failed error: espcomm\_open failed error: espcomm\_upload\_mem failed Error during Upload: uploading error: uploading error: exit status 2 Upload failed Command Process exited with code 1 ---
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [November 25, 2020, 12:51am UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/2 "2020-11-25T00:51:31Z")
THE ERROR XOD IS GIVING TO BE EXACT IS THE FOLLOWING Uploading compiled code to the board… Waiting for upload port… No new serial port detected. esptool v0.4.13 - setting board to ck setting baudrate from 115200 to 115200 setting port from COM1 to COM4 setting address from 0x00000000 to 0x00000000 espcomm\_upload\_file espcomm\_upload\_mem setting serial port timeouts to 1000 ms opening bootloader resetting board trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 resetting board trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 resetting board trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 trying to connect flush start setting serial port timeouts to 1 ms setting serial port timeouts to 1000 ms flush complete espcomm\_send\_command: sending command header espcomm\_send\_command: sending command payload read 0, requested 1 warning: espcomm\_sync failed error: espcomm\_open failed error: espcomm\_upload\_mem failed Error during Upload: uploading error: uploading error: exit status 2 Upload failed Command Process exited with code 1 ---
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [November 25, 2020, 11:27pm UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/3 "2020-11-25T23:27:30Z")
yes , no , maybe , anybody ? ---
**Author:** ![gweimer](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@gweimer](https://forum.xod.io/u/gweimer)\ **Post date:** [November 25, 2020, 11:55pm UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/4 "2020-11-25T23:55:05Z")
Not sure. XOD uses same application as IDE to push code to Arduino. Did you make any wiring changes? Connecting hardware to communication pins used by USB will cause problems. ---
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [November 26, 2020, 1:21am UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/5 "2020-11-26T01:21:23Z")
thank you for the reply , any help is good help all i have is simple flashing led on a standard arduino uno , i have exactly the same set up at work both boards load any code perfect from arduino ide to the actual board , it just loading from xod to arduino thats the problem , some one on here had the same problem it would appear , all they said was it was a admin problem on both the computers , thats all they said , just want to know if any one knows anything about it , or how to or were to look at least thank you ---
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [November 26, 2020, 1:29am UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/6 "2020-11-26T01:29:21Z")
if you look at the fail status code above , its like its trying to communicate but somthin is stopping it , the RX led flashes , but not the TX led on boards ---
**Author:** ![projie](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/projie/32/3696_2.png) [@projie](https://forum.xod.io/u/projie)\ **Post date:** [December 1, 2020, 2:48am UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/7 "2020-12-01T02:48:41Z")
solved – windows issues - check all ur settings ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/xod/original/1X/eb7348baa04192c2ef932d1db54d44f09f8a7888.png) [@system](https://forum.xod.io/u/system)\ **Post date:** [December 31, 2020, 2:48am UTC](https://forum.xod.io/t/good-old-uploading-issues/4639/8 "2020-12-31T02:48:47Z")
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.