# Get fault cod1 with upload

**URL:** <https://forum.xod.io/t/get-fault-cod1-with-upload/2471>\
**Category:** Uncategorized\
**Created:** [August 2, 2019, 5:05pm UTC](https://forum.xod.io/t/get-fault-cod1-with-upload/2471 "2019-08-02T17:05:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pyropeet](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@pyropeet](https://forum.xod.io/u/pyropeet)\
**Post date:** [August 2, 2019, 5:05pm UTC](https://forum.xod.io/t/get-fault-cod1-with-upload/2471/1 "2019-08-02T17:05:48Z")

</div>

Since today i can’t upload anything with XOD. When i upload with arduino program the board don;t give a fault.

Upload failed  
Command `C:\Users\PJ\AppData\Local\Programs\XOD IDE\resources\arduino-cli.exe --config-file=C:\Users\PJ\AppData\Local\Temp\arduino-cli7CAUPA\.cli-config.yml upload --fqbn arduino:avr:uno --port COM3 --verbose -t C:\Users\PJ\AppData\Local\Temp\xod_temp_sketchbooksiY0hN\xod_1564765072082_sketch` failed with code 1  
Make sure the board is connected, the cable is working, the board model set correctly, the upload port belongs to the board, the board drivers are installed, the upload options (if any) match your board specs.

Anybody have ideas?

---

<div class="post-metadata">

**Author:** ![cesars](https://avatars.discourse-cdn.com/v4/letter/c/f05b48/32.png) [@cesars](https://forum.xod.io/u/cesars)\
**Post date:** [August 2, 2019, 7:14pm UTC](https://forum.xod.io/t/get-fault-cod1-with-upload/2471/2 "2019-08-02T19:14:41Z")

</div>

delete folder `C:\Users\PJ\xod\ __packages__ ` …try again

---

<div class="post-metadata">

**Author:** ![pyropeet](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@pyropeet](https://forum.xod.io/u/pyropeet)\
**Post date:** [August 3, 2019, 6:08am UTC](https://forum.xod.io/t/get-fault-cod1-with-upload/2471/3 "2019-08-03T06:08:00Z")

</div>

Thanks my friend i removed the map and it works!

Have a nice day!  
Best regards,

Pyropeet