# Error on Leonardo deployment **URL:** \ **Category:** Uncategorized\ **Created:** [October 3, 2019, 9:47pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655 "2019-10-03T21:47:43Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 3, 2019, 9:47pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/1 "2019-10-03T21:47:43Z")
I can’t upload to the Leonardo - New here and have tried EVERYTHING… Cant get ot to work - reinstalled, etc get the following error… avrdude: ser\_send(): write error: sorry no info avail avrdude: butterfly\_recv(): programmer is not responding avrdude: error: programmer did not respond to command: leave prog mode avrdude: ser\_send(): write error: sorry no info avail avrdude: butterfly\_recv(): programmer is not responding avrdude: error: programmer did not respond to command: exit bootloader avrdude done. Thank you. Error: exit status 1 Error during upload. Upload failed Command `C:\Users\Mel\AppData\Local\Programs\XOD IDE\resources\arduino-cli.exe --config-file=C:\Users\Mel\AppData\Local\Temp\arduino-cliPwcwYW\.cli-config.yml upload --fqbn arduino:avr:leonardo --port COM4 --verbose -t C:\Users\Mel\AppData\Local\Temp\xod_temp_sketchbookm1i4FW\xod_1570138377913_sketch` failed with code 1 Make sure the board is connected, the cable is working, the board model set correctly, the upload port belongs to the board, the board drivers are installed, the upload options (if any) match your board specs. Please help ---
**Author:** ![gabbapeople](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/gabbapeople/32/1517_2.png) [@gabbapeople](https://forum.xod.io/u/gabbapeople)\ **Post date:** [October 4, 2019, 5:13am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/2 "2019-10-04T05:13:32Z")
Hi, [rmsstudios](https://forum.xod.io/u/rmsstudios)! Can you please tell us: - What Arduino board do you use? - What manufacturer? - Are you sure that there is a boot-loader installed on the Board and it functions normally? - Whether your board was programmed before this error or is it the first attempt to flash the program? Thank you. ---
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 4, 2019, 7:58am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/3 "2019-10-04T07:58:12Z")
Hi Thanx for replying Its an original Arduino Leonardo v3 board - all works fine with Arduino IDE… I can upload etc with the IDE, but with XOD I get the errors I have made sure to use the correct board selection as well as port. (currently com-4) Strangely tho, I have noticed on the IDE that the com port toggles between com4(read) and com3(write) - I cant figure out why… I therefore suspect coms errors… Hope this helps Thanx Mel ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 4, 2019, 10:22am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/4 "2019-10-04T10:22:16Z")
Do you connect Arduino to the PC through the USB hub? If so, try to connect it directly to the PC, it may help. ---
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 4, 2019, 11:09am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/5 "2019-10-04T11:09:39Z")
Yes - connected directly to PC - tried 2 seperate ports Now getting different error… Uploading compiled code to the board… avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright © 2000-2005 Brian Dean, [http://www.bdmicro.com/](http://www.bdmicro.com/) Copyright © 2007-2014 Joerg Wunsch ``` System wide configuration file is "C:\Users\Mel\xod\ __packages__ \packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf" Using Port : COM5 Using Programmer : avr109 Overriding Baud Rate : 57600 AVR Part : ATmega32U4 Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PA0 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00 flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00 lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : butterfly Description : Atmel AppNote AVR109 Boot Loader ``` Connecting to programmer: .avrdude: butterfly\_recv(): programmer is not responding avrdude: butterfly\_recv(): programmer is not responding Still stumped… Mel ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 4, 2019, 12:27pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/6 "2019-10-04T12:27:22Z")
Hm… we need to investigate it. Can you provide more information about your OS (version) and version of the XOD IDE? If you have another board, can you try to upload something on it? I mean, this error reproduces only with Arduino Leonardo, or you have the same behaviour with some other boards? Until we investigate it and fix, you can use Arduino IDE to upload the code (you can get it in Deploy -\> Show code for Arduino). Sorry for the inconveniences. ---
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 4, 2019, 1:47pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/7 "2019-10-04T13:47:35Z")
Hi brusher Windows 8 (64) with latest ver of XOD and Ard IDE Unfortunately no substitute board…maybe I can try on another PC - will report back Thanx ---
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 4, 2019, 3:08pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/8 "2019-10-04T15:08:34Z")
OK - so it works PERFECTLY on PC2!!! Exact same OS, etc (in fact the HDs were cloned!!!) There is something clashing on PC1… I have started shutting down services to see if theres any change, but so far nothing helps… Really strange… Mel ---
**Author:** ![gweimer](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@gweimer](https://forum.xod.io/u/gweimer)\ **Post date:** [October 5, 2019, 2:05am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/9 "2019-10-05T02:05:34Z")
Does PC1 have a ` __lib__ \xod` folder in your XOD Workspace? If so, deleting it will probably resolve the problem. This folder is created when you modify a built-in patch, and having it prevents the newer versions of built-in patches from being used after you update. NOTE: just delete the `xod` subfolder under ` __lib__ `, not the entire ` __lib__ ` folder. ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 7, 2019, 3:44pm UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/10 "2019-10-07T15:44:42Z")
Can you provide a configuration of the PC1? Also, does it have a USB 3.0? ---
**Author:** ![rmsstudios](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/rmsstudios/32/1532_2.png) [@rmsstudios](https://forum.xod.io/u/rmsstudios)\ **Post date:** [October 8, 2019, 7:35am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/11 "2019-10-08T07:35:13Z")
Solved!!! It’s a USB port problem - ports on MSI motherboard dont seem to work correctly… I installed a addon USB board and used that port - and all works 100% Thanx to all for trying to help Mel ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/xod/original/1X/eb7348baa04192c2ef932d1db54d44f09f8a7888.png) [@system](https://forum.xod.io/u/system)\ **Post date:** [October 10, 2019, 7:35am UTC](https://forum.xod.io/t/error-on-leonardo-deployment/2655/12 "2019-10-10T07:35:18Z")
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.