# Debugging in XOD

**URL:** https://forum.xod.io/t/debugging-in-xod/3187
**Category:** Uncategorized
**Created:** [January 3, 2020, 7:35am UTC](https://forum.xod.io/t/debugging-in-xod/3187 "2020-01-03T07:35:23Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![moi-yashik2](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/moi-yashik2/32/1764_2.png) [@moi-yashik2](https://forum.xod.io/u/moi-yashik2)
#### Post date: [January 3, 2020, 7:35am UTC](https://forum.xod.io/t/debugging-in-xod/3187/1 "2020-01-03T07:35:23Z")

</div>

Hello.  
How debugging in Xod?  
In arduino IDE i used serial monitor for watching status working my programm.  
How used serial monitor in XOD? How node used for control in Xod?  
I used “watch” node[Pulse.xodball](https://forum.xod.io/uploads/short-url/eMbk4WP2fU6KqyctgCEPkRaOU5s.xodball) (4.3 KB) , but i need used serial monitor for watching sequence command in programm.

I don’t understand why my path not work (resave in EPPROM):

 ![113](https://canada1.discourse-cdn.com/flex027/uploads/xod/original/2X/a/a7301071e88310bc1df044b044061f936262261d.jpeg)

---

<div class="post-metadata">

### Author: ![cesars](https://avatars.discourse-cdn.com/v4/letter/c/f05b48/32.png) [@cesars](https://forum.xod.io/u/cesars)
#### Post date: [January 3, 2020, 8:19am UTC](https://forum.xod.io/t/debugging-in-xod/3187/2 "2020-01-03T08:19:01Z")

</div>

use node “console-log”

---

<div class="post-metadata">

### Author: ![moi-yashik2](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/moi-yashik2/32/1764_2.png) [@moi-yashik2](https://forum.xod.io/u/moi-yashik2)
#### Post date: [January 3, 2020, 11:55am UTC](https://forum.xod.io/t/debugging-in-xod/3187/3 "2020-01-03T11:55:21Z")

</div>

«console-log» is good work, thank you. But not work saved to EEPROM.  
Please, anybody, check this or i incorrect write co[Pulse.xodball](https://forum.xod.io/uploads/short-url/fZI3C7e6uBNAVJtJTosx7fU8yjy.xodball) (9.4 KB) de.