When I try to upload I get the following message:
· Project was successfully transpiled. Searching for device…
· Port with connected Arduino was found. Installing toolchains…
· Toolchain is installed. Uploading…
Upload failed. ChildProcessError: Command failed: “C:\Users\Paul\AppData\Roaming\xod-client-electron\packages\arduino\tools\avrdude\6.3.0-arduino9\bin\avrdude.exe” -C “C:\Users\Paul\AppData\Roaming\xod-client-electron\packages\arduino\tools\avrdude\6.3.0-arduino9\etc\avrdude.conf” -p atmegang -c arduino -P COM8 -b 19200 -D “-Uflash:w:C:\Users\Paul\AppData\Roaming\xod-client-electron\upload-temp\build\xod-arduino-sketch.cpp.hex:i”
avrdude.exe: AVR Part “atmegang” not found.
Valid parts are:
uc3a0512 = AT32UC3A0512
c128 = AT90CAN128
c32 = AT90CAN32
c64 = AT90CAN64
pwm2 = AT90PWM2
pwm216 = AT90PWM216
The list of valid parts is quite long so I left out most of it. The end of message is,
"C:\Users\Paul\AppData\Roaming\xod-client-electron\packages\arduino\tools\avrdude\6.3.0-arduino9\bin\avrdude.exe" -C "C:\Users\Paul\AppData\Roaming\xod-client-electron\packages\arduino\tools\avrdude\6.3.0-arduino9\etc\avrdude.conf" -p atmegang -c arduino -P COM8 -b 19200 -D "-Uflash:w:C:\Users\Paul\AppData\Roaming\xod-client-electron\upload-temp\build\xod-arduino-sketch.cpp.hex:i" (exited with error code 1)
When using the Arduino program i found that if I pressed the Rest button on the Arduino at the start of the upload I could get it to work otherwise it also failed.
The board I am using is an Arduino NG.
I have read some of the other Upload problems tried deleting XOD and re-installing but it still does not work.