# 0.25.0 Installer problem **URL:** \ **Category:** Uncategorized\ **Created:** [October 17, 2018, 10:00am UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236 "2018-10-17T10:00:20Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![rutafar](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@rutafar](https://forum.xod.io/u/rutafar)\ **Post date:** [October 17, 2018, 10:00am UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/1 "2018-10-17T10:00:20Z")
## I’m having problem uploading to ESP8266 board (XOD 0.25.0), after selecting “Download & Install” it starts the download then after sometime it ends with error. Appreciate any help. * * * Installing Arduino dependencies… Downloading esp8266:esptool@0.4.13… esp8266:esptool@0.4.13 downloaded Downloading esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2… esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 downloaded Downloading esp8266:mkspiffs@0.2.0… esp8266:mkspiffs@0.2.0 downloaded Downloading esp8266:esp8266@2.4.3… esp8266:esp8266@2.4.3 downloaded Installing esp8266:esptool@0.4.13 esp8266:esptool@0.4.13 installed Installing esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 runtime: VirtualAlloc of 2097152 bytes failed with errno=487 fatal error: runtime: cannot map pages in arena address space runtime stack: runtime.throw(0xa25f89, 0x30) /home/jenkins/go1.10.2-patched/src/runtime/panic.go:616 +0x6b runtime.sysMap(0x4cc40000, 0x200000, 0x3478fe01, 0xdb2b58 ) /home/jenkins/go1.10.2-patched/src/runtime/mem\_windows.go:124 +0x100 runtime.(\*mheap).sysAlloc(0xda1620, 0x200000, 0x26501) /home/jenkins/go1.10.2-patched/src/runtime/malloc.go:470 +0x22f runtime.(\*mheap).grow(0xda1620, 0x100, 0x0) /home/jenkins/go1.10.2-patched/src/runtime/mheap.go:907 +0x4e runtime.(\*mheap).allocSpanLocked(0xda1620, 0x100, 0xdb2b68, 0x1000) /home/jenkins/go1.10.2-patched/src/runtime/mheap.go:820 +0x2e4 runtime.(\*mheap).alloc\_m(0xda1620, 0x100, 0xda0101, 0x14ce3) /home/jenkins/go1.10.2-patched/src/runtime/mheap.go:686 +0x115 runtime.(\*mheap).alloc.func1() /home/jenkins/go1.10.2-patched/src/runtime/mheap.go:753 +0x40 runtime.(\*mheap).alloc(0xda1620, 0x100, 0x12010101, 0x0) /home/jenkins/go1.10.2-patched/src/runtime/mheap.go:752 +0x6c runtime.largeAlloc(0x1ffe00, 0x440101, 0x1640000) /home/jenkins/go1.10.2-patched/src/runtime/malloc.go :826 +0x7b runtime.mallocgc.func1() /home/jenkins/go1.10.2-patched/src/runtime/malloc.go:721 +0x39 runtime.systemstack(0x0) /home/jenkins/go1.10.2-patched/src/runtime/asm\_386.s:464 +0x5e runtime.mstart() /home/jenkins/go1.10.2-patched/src/runtime/proc.go:1175 goroutine 1 [running]: runtime.systemstack\_switch() /home/jenkins/go1.10.2-patched/src/runtime/asm\_386.s:418 fp=0x12239900 sp=0x122398fc pc=0x44bb10 runtime.mallocgc(0x1ffe00, 0x96be60, 0x12239901, 0x6000) /home/jenkins/go1.10.2-patched/src/runtime/malloc.go:720 +0x67b fp=0x12239954 sp=0x12239900 pc=0x40e7fb runtime.makeslice(0x96be60, 0x1ffe00, 0x1ffe00, 0x4ca6a000, 0x649d81, 0x11f461e0) /home/jenkins/go1.10.2-patched/src/runtime/slice.go:61 +0x59 fp=0x12239968 sp=0x12239954 pc=0x439da9 bytes.makeSlice(0x1ffe00, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/bytes/buffer.go:230 +0x61 fp=0x12239984 sp=0x12239968 pc=0x4d6ff1 bytes.(\*Buffer).grow(0x11f301e0, 0x200, 0x6000) /home/jenkins/go1.10.2-patched/src/bytes/buffer.go:144 +0x112 fp=0x122399ac sp=0x12239984 pc=0x4d6a82 bytes.(\*Buffer).ReadFrom(0x11f301e0, 0xaa0b40, 0x11e17b00, 0x34b10120, 0x11f301e0, 0x1, 0xe80) /home/jenkins/go1.10.2-patched/src/bytes/buffer.go:204 +0x45 fp=0x122399e8 sp=0x122399ac pc=0x4d6e35 io.copyBuffer(0xaa0c20, 0x11f301e0, 0xaa0b40, 0x11e17b00, 0x0, 0x0, 0x0, 0x60, 0x9b4b80, 0x1222ba01, …) /home/jenkins/go1.10.2-patched/src/io/io.go:386 +0x2be fp=0x12239a24 sp=0x122399e8 pc=0x453f6e io.Copy(0xaa0c20, 0x11f301e0, 0xaa0b40, 0x11e17b00, 0x64, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/io/io.go:362 +0x51 fp=0x12239a54 sp=0x12239a24 pc=0x453c81 [github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Tar](http://github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Tar)(0xaa1920, 0x11ffdce0, 0x11f29440, 0x35, 0x0, 0xb, 0xa0f90f) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract/extract.go:168 +0x2bc fp= 0x12239bf4 sp=0x12239a54 pc=0x65f86c [github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Gz](http://github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Gz)(0xaa1920, 0x11ffdc90, 0x11f29440, 0x35, 0x0, 0xb, 0xa0eae4) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract/extract.go:110 +0x173 fp=0x12239c78 sp=0x12239bf4 pc=0x65f513 [github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Archive](http://github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract.Archive)(0xaa1920, 0x11ffdc90, 0x11f29440, 0x35, 0x0, 0x0, 0x1221a278) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/codeclysm/extract/extract.go:65 +0x184 fp=0x12239d00 sp=0x12239c78 pc=0x65f004 [github.com/arduino/arduino-cli/arduino/resources.(\*DownloadResource](http://github.com/arduino/arduino-cli/arduino/resources.(*DownloadResource)).Install(0x12008cc0, 0x11de5ff8, 0x11f6c000, 0x1221a278, 0x0, 0x0) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/resources/install.go:57 +0x2cb fp=0x12239d68 sp=0x12239d00 pc=0x66299b [github.com/arduino/arduino-cli/arduino/cores/packagemanager.(\*PackageManager](http://github.com/arduino/arduino-cli/arduino/cores/packagemanager.(*PackageManager)).InstallTool(0x11f491e0, 0x1200ade0, 0x0, 0x0) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/cores/packagemanager/install\_uninstall.go:85 +0xde fp=0x12239db8 sp=0x12239d68 pc=0x77524e [github.com/arduino/arduino-cli/commands/core.InstallToolRelease](http://github.com/arduino/arduino-cli/commands/core.InstallToolRelease)(0x11f491e0, 0x1200ade0) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/core/install.go:131 +0x122 fp=0x12239e24 sp=0x12239db8 pc=0x8997e2 [github.com/arduino/arduino-cli/commands/core.installPlatformByRef](http://github.com/arduino/arduino-cli/commands/core.installPlatformByRef)(0x11f491e0, 0x11f491a0) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/core/install.go:72 +0x6c fp=0x12239e58 sp=0x12239e24 pc=0x898f1c [github.com/arduino/arduino-cli/commands/core.runInstallCommand](http://github.com/arduino/arduino-cli/commands/core.runInstallCommand)(0x11f58140, 0x11f465d0, 0x1, 0x2) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/core/install.go:54 +0xc4 fp=0x12239e90 sp=0x12239e58 pc=0x898e84 [github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(\*Command](http://github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command)).execute(0x11f58140, 0x11f465a0, 0x2, 0x2, 0x11f58140, 0x11f465a0) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:760 +0x20e fp=0x12239f04 sp=0x12239e90 pc=0x84fbee [github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(\*Command](http://github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command)).ExecuteC(0x11e712c0, 0x11f588c0, 0x11e71e00, 0x11e71a40) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:846 +0x28a fp=0x12239fa0 sp=0x12239f04 pc=0x85050a [github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(\*Command](http://github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command)).Execute(0x11e712c0, 0x8f2718, 0x8f34f4) /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:794 +0x21 fp=0x12239fb4 sp=0x12239fa0 pc=0x850261 main.main() /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/main.go:30 +0x1f fp=0x12239fc8 sp=0x12239fb4 pc=0x8f352f runtime.main() /home/jenkins/go1.10.2-patched/src/runtime/proc.go:198 +0x1ea fp=0x12239ff0 sp=0x12239fc8 pc=0x4296aa runtime.goexit() /home/jenkins/go1.10.2-patched/src/runtime/asm\_386.s:1665 +0x1 fp=0x12239ff4 sp=0x12239ff0 pc=0x44d5f1 goroutine 5 [syscall, 12 minutes]: os/signal.signal\_recv(0x0) /home/jenkins/go1.10.2-patched/src/runtime/sigqueue.go:139 +0x12f os/signal.loop() /home/jenkins/go1.10.2-patched/src/os/signal/signal\_unix.go:22 +0x1a created by os/signal.init.0 /home/jenkins/go1.10.2-patched/src/os/signal/signal\_unix.go:28 +0x37 goroutine 152 [IO wait]: internal/poll.runtime\_pollWait(0x321f90e0, 0x72, 0x0) /home/jenkins/go1.10.2-patched/src/runtime/netpoll.go:173 +0x4b internal/poll.(\*pollDesc).wait(0x121a427c, 0x72, 0xd52100, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/internal/poll/fd\_poll\_runtime.go:85 +0x8c internal/poll.(\*ioSrv).ExecIO(0xd9c8e0, 0x121a4194, 0xa33f30, 0x40, 0x42b3b0, 0x1215fee8) /home/jenkins/go1.10.2-patched/src/internal/poll/fd\_windows.go:223 +0xf1 internal/poll.(\*FD).Read(0x121a4180, 0x1206e000, 0x1000, 0x1000, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/internal/poll/fd\_windows.go:484 +0x1f0 net.(\*netFD).Read(0x121a4180, 0x1206e000, 0x1000, 0x1000, 0x427514, 0xa34334, 0x12233c10) /home/jenkins/go1.10.2-patched/src/net/fd\_windows.go:151 +0x3f net.(\*conn).Read(0x11f6c2d0, 0x1206e000, 0x1000, 0x1000, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/net/net.go: 176 +0x56 crypto/tls.(\*block).readFromUntil(0x1202fbe0, 0x321f91e0, 0x11f6c2d0, 0x5, 0x11f6c2d0, 0x0) /home/jenkins/go1.10.2-patched/src/crypto/tls/conn.go:493 +0x76 crypto/tls.(\*Conn).readRecord(0x11e16900, 0xa34317, 0x11e169a0, 0x11f6c2d0) /home/jenkins/go1.10.2-patched/src/crypto/tls/conn.go:595 +0xbd crypto/tls.(\*Conn).Read(0x11e16900, 0x11f7d000, 0x1000, 0x1000, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/crypto/tls/conn.go:1156 +0xdd bufio.(\*Reader).Read(0x1207b920, 0x11e64e20, 0x9, 0x9, 0x5b8289, 0x11e16af0, 0xfffffffe) /home/jenkins/go1.10.2-patched/src/bufio/bufio.go:216 +0x22b io.ReadAtLeast(0xaa0bc0, 0x1207b920, 0x11e64e20, 0x9, 0x9, 0x9, 0x12230000, 0x164035c, 0x12233dcc) /home/jenkins/go1.10.2-patched/src/io/io.go:309 +0x68 io.ReadFull(0xaa0bc0, 0x1207b920, 0x11e64e20, 0x9, 0x9, 0x11, 0x1000, 0x11) /home/jenkins/go1.10.2-patched/src/io/io.go:327 +0x45 net/http.http2readFrameHeader(0x11e64e20, 0x9, 0x9, 0xaa0bc0, 0x1207b920, 0x0, 0x0, 0x0, 0x11e01300, 0x12176090) /home/jenkins/go1.10.2-patched/src/net/http/h2\_bundle.go:1517 +0x66 net/http.(\*http2Framer).ReadFrame(0x11e64e00, 0x11fe2160, 0x0, 0x0, 0x0) /home/jenkins/go1.10.2-patched/src/net/http/h2\_bundle.go:1775 +0x82 net/http.(\*http2clientConnReadLoop).run(0x12233fdc, 0xa34058, 0x11e21fdc) /home/jenkins/go1.10.2-patched/src/net/http/h2\_bundle.go:8028 +0x6d net/http.(\*http2ClientConn).readLoop(0x11f7a000) /home/jenkins/go1.10.2-patched/src/net/http/h2\_bundle.go:7956 +0x58 created by net/http.(\*http2Transport).newClientConn /home/jenkins/go1.10.2-patched/src/net/http/h2\_bundle.go:7143 +0x576 `C:\Users\MyName\AppData\Local\Programs\XOD IDE\resources\arduino-cli.exe --config-file=C:\Users\MyName\AppData\Local\Temp\arduino-cli719pQb\.cli-config.yml core install esp8266:esp8266` failed with code 2 ---
**Author:** ![nkrkv](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/nkrkv/32/8_2.png) [@nkrkv](https://forum.xod.io/u/nkrkv)\ **Post date:** [October 17, 2018, 10:35am UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/2 "2018-10-17T10:35:58Z")
Looks like a bug in `arduino-cli` we can’t affect directly. It is an interesting case, let’s try to find a workaround. Here is interesting piece: > [@rutafar](#): > > runtime: VirtualAlloc of 2097152 bytes failed with errno=487 > fatal error: runtime: cannot map pages in arena address space Looks like you gone out of RAM. How much RAM do you have on PC? What OS do you have? 64-bit Windows 10, right? What will happen if you try to repeat “ Download & Install”? The second time some tools are already installed and I wonder will they consume RAM again. ---
**Author:** ![rutafar](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@rutafar](https://forum.xod.io/u/rutafar)\ **Post date:** [October 17, 2018, 11:13am UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/3 "2018-10-17T11:13:41Z")
Thanks for your replay, I tested on 2 PCs: Dell i7-4900MQ 32GB Windows 10 x64 (1809) And Lenovo all-in-one i5-4570T 16GB Windows 10 x64 (1809) Both with no success, I’m reporting from the i7-32GB machine On next run I’m getting this: Installing Arduino dependencies… Downloading esp8266:esptool@0.4.13… esp8266:esptool@0.4.13 downloaded Downloading esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2… esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 downloaded Error: read tcp 192.168.0.4:55504-\>54.231.72.115:443: wsarecv: An existing connection was forcibly closed by the remote host. Error downloading esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 `C:\Users\MyName\AppData\Local\Programs\XOD IDE\resources\arduino-cli.exe --config-file=C:\Users\MyName\AppData\Local\Temp\arduino-cli7tcwxz\.cli-config.yml core install esp8266:esp8266` failed with code 5 ---
**Author:** ![nkrkv](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/nkrkv/32/8_2.png) [@nkrkv](https://forum.xod.io/u/nkrkv)\ **Post date:** [October 18, 2018, 9:23am UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/4 "2018-10-18T09:23:53Z")
Impressive PCs! Definitely should not be out-of-memory. I wonder what the following means: > read tcp 192.168.0.4:55504-\>54.231.72.115:443: wsarecv: An existing connection was forcibly closed by the remote host. Are you behind a firewall or a corporate proxy? Do you have a chance to retry with “another” internet? ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 18, 2018, 1:16pm UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/5 "2018-10-18T13:16:30Z")
@rutafar, thanks for the report! It looks like a bug in the `arduino-cli`, but I can’t reproduce it. 🤔 Tested on PC: Lenovo i3-4160T 3.1GHz, 4 GB RAM, Windows 10 x64 Try to remove ` __packages__ ` directory in your workspace, restart the IDE and then install this package again. While it will install packages open the Task Manager and take a look on `arduino-cli.exe` process. How much RAM and CPU it uses? And is it still failing? If it still failing, you can try to install packages manually. The easiest way to install packages: install them within Arduino IDE and then copy installed packages into ` __packages__ ` directory inside your workspace. But latest release of `esp8266` have a little bug in the `platform.txt`, so we did a little fix and named this version `2.4.3` (next official release will be 2.5.0) and uploaded it onto our server. So then you can just upgrade your package by selecting `Deploy -> Update Packages & Toolchains...` menu item. ---
**Author:** ![rutafar](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@rutafar](https://forum.xod.io/u/rutafar)\ **Post date:** [October 18, 2018, 1:24pm UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/6 "2018-10-18T13:24:01Z")
Many thanks, Yes, I’m using Zone alarm firewall but no proxy. The good news is that the IDE managed to finish the installation now and I got this message (tested on booth machines, and firewall still ON): Arduino dependencies installed Package "esp8266" installed successfully Now you are able to upload the program Deployment Watched Values InstallerCompilerUploaderDebugger Installing Arduino dependencies… Downloading esp8266:esptool@0.4.13… esp8266:esptool@0.4.13 downloaded Downloading esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2… esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 downloaded Downloading esp8266:mkspiffs@0.2.0… esp8266:mkspiffs@0.2.0 downloaded Downloading esp8266:esp8266@2.4.3… esp8266:esp8266@2.4.3 downloaded Installing esp8266:esptool@0.4.13 esp8266:esptool@0.4.13 installed Installing esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 esp8266:xtensa-lx106-elf-gcc@1.20.0-26-gb404fb9-2 installed Installing esp8266:mkspiffs@0.2.0 esp8266:mkspiffs@0.2.0 installed Installing esp8266:esp8266@2.4.3… esp8266:esp8266@2.4.3 installed === All Arduino dependencies are installed successfully === Appreciate your help, thanks ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 18, 2018, 1:43pm UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/7 "2018-10-18T13:43:11Z")
Good to hear it! So you just deleted the ` __packages__ ` directory and tried again and it helps? Am I right? ---
**Author:** ![rutafar](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@rutafar](https://forum.xod.io/u/rutafar)\ **Post date:** [October 18, 2018, 2:11pm UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/8 "2018-10-18T14:11:19Z")
No, I did nothing, only retrying the upload and finally it worked, Cheers ---
**Author:** ![brusher\_ru](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.xod.io/brusher_ru/32/12_2.png) [@brusher\_ru](https://forum.xod.io/u/brusher_ru)\ **Post date:** [October 18, 2018, 2:13pm UTC](https://forum.xod.io/t/0-25-0-installer-problem/1236/9 "2018-10-18T14:13:56Z")
Phew 😃 Thank you for reporting and I hope you’ll enjoy xoding in spite of this error 🙂