# Uncategorized
**URL:** https://forum.xod.io/c/uncategorized/1.md?no_subcategories=false&page=2
[Latest](https://forum.xod.io/latest.md) · [Categories](https://forum.xod.io/categories.md)
**Page:** 3
---
## [EEPROM loop problem](https://forum.xod.io/t/eeprom-loop-problem/6804)
**Author:** [@arduinojonas](https://forum.xod.io/u/arduinojonas)\
**Replies:** 6\
**Last updated:** [February 25, 2024, 4:20am UTC](https://forum.xod.io/t/eeprom-loop-problem/6804 "2024-02-25T04:20:09Z")
Hi to all, I have a problem with gamer24/ext-eeprom-rw-nodelibrary, all nodes I try to use have same result: loop. Can anyone help? Thank you.
---
## [Come togliere librerie da xod](https://forum.xod.io/t/come-togliere-librerie-da-xod/6799)
**Author:** [@fiorenzo](https://forum.xod.io/u/fiorenzo)\
**Replies:** 3\
**Last updated:** [February 19, 2024, 12:45pm UTC](https://forum.xod.io/t/come-togliere-librerie-da-xod/6799 "2024-02-19T12:45:36Z")
come posso togliere le librerie che non uso da xod
---
## [Programmer JTAGICE mkII](https://forum.xod.io/t/programmer-jtagice-mkii/6786)
**Author:** [@pj1954](https://forum.xod.io/u/pj1954)\
**Replies:** 0\
**Last updated:** [February 7, 2024, 4:34pm UTC](https://forum.xod.io/t/programmer-jtagice-mkii/6786 "2024-02-07T16:34:52Z")
It is possible to program the ATMEGA 2560 vía AVR JTAGICE mkII using XOD ?
---
## [Web interface esp8266](https://forum.xod.io/t/web-interface-esp8266/6787)
**Author:** [@ninetot](https://forum.xod.io/u/ninetot)\
**Replies:** 0\
**Last updated:** [February 7, 2024, 5:11pm UTC](https://forum.xod.io/t/web-interface-esp8266/6787 "2024-02-07T17:11:46Z")
Hello. Help please. There is a project: it is necessary that the readings from the lcd 1602 screen be duplicated in the web interface… The esp8266 siodemka v3 board is at hand… I am grateful in advance.
---
## [Node for convert pulse to bool](https://forum.xod.io/t/node-for-convert-pulse-to-bool/6774)
**Author:** [@trom-24](https://forum.xod.io/u/trom-24)\
**Replies:** 1\
**Last updated:** [January 28, 2024, 1:15am UTC](https://forum.xod.io/t/node-for-convert-pulse-to-bool/6774 "2024-01-28T01:15:50Z")
Hello, It would by nice have a node that convert pulse to bool. What do you think?
---
## [On boot, pulse bool value](https://forum.xod.io/t/on-boot-pulse-bool-value/6773)
**Author:** [@trom-24](https://forum.xod.io/u/trom-24)\
**Replies:** 1\
**Last updated:** [January 28, 2024, 1:07am UTC](https://forum.xod.io/t/on-boot-pulse-bool-value/6773 "2024-01-28T01:07:47Z")
Sorry for my english! I tried many things, but cannot find a way to pulse a bool from the boot node!
---
## [Motore elettrico temporizzato](https://forum.xod.io/t/motore-elettrico-temporizzato/6769)
**Author:** [@fiorenzo](https://forum.xod.io/u/fiorenzo)\
**Replies:** 5\
**Last updated:** [January 28, 2024, 1:00am UTC](https://forum.xod.io/t/motore-elettrico-temporizzato/6769 "2024-01-28T01:00:21Z")
Dovrei azionare un motore che deve girare per (x) secondi dx pausa di un secondo e x secondi Sx
---
## [108-text-lcd. Simulation error](https://forum.xod.io/t/108-text-lcd-simulation-error/6753)
**Author:** [@rebox](https://forum.xod.io/u/rebox)\
**Replies:** 1\
**Last updated:** [January 11, 2024, 2:06pm UTC](https://forum.xod.io/t/108-text-lcd-simulation-error/6753 "2024-01-11T14:06:14Z")
---
## [Project lost twice](https://forum.xod.io/t/project-lost-twice/6741)
**Author:** [@gb79126](https://forum.xod.io/u/gb79126)\
**Replies:** 2\
**Last updated:** [January 5, 2024, 8:58am UTC](https://forum.xod.io/t/project-lost-twice/6741 "2024-01-05T08:58:02Z")
Hi, my project disappeared after restarting XOD. This is the second time that it happens, the project was saved regularly, now is no where to be found, not even through Finder… just wanished. Any guess what the issue is…
---
## [esp32-S3-WROOM-1](https://forum.xod.io/t/esp32-s3-wroom-1/6744)
**Author:** [@edc](https://forum.xod.io/u/edc)\
**Replies:** 0\
**Last updated:** [January 3, 2024, 8:55pm UTC](https://forum.xod.io/t/esp32-s3-wroom-1/6744 "2024-01-03T20:55:08Z")
Dear masters! Please explain how to configure the interfaces on esp32-S3-WROOM-1, namely l2c, how to specify the contacts SDA and SCL (when trying to connect to pins 8 and 9, there is a strong heating) how to specify a l…
---
## [How can I get verbose compiler command line output logs?](https://forum.xod.io/t/how-can-i-get-verbose-compiler-command-line-output-logs/6732)
**Author:** [@bcrashkopf](https://forum.xod.io/u/bcrashkopf)\
**Replies:** 0\
**Last updated:** [December 15, 2023, 11:04pm UTC](https://forum.xod.io/t/how-can-i-get-verbose-compiler-command-line-output-logs/6732 "2023-12-15T23:04:32Z")
I think the title says it all, but here’s the background: XOD Desktop IDE v0.38.0 I’m wrapping an Arduino device library. My code works fine as an Arduino sketch, but not when compiled in XOD. I’m trying to figure ou…
---
## [Xod не открывает сохраненные проекты](https://forum.xod.io/t/xod/6729)
**Author:** [@tolan82](https://forum.xod.io/u/tolan82)\
**Replies:** 1\
**Last updated:** [December 15, 2023, 9:48pm UTC](https://forum.xod.io/t/xod/6729 "2023-12-15T21:48:02Z")
Помогите. Первый день работаю с программой долго делал проект. Все устроило, но нужно поменять пару значений. После сохранения проекта, программа не открывает и пишет invalid xodball format. Пробовал другие делать, все т…
---
## [Problem with ir remote](https://forum.xod.io/t/problem-with-ir-remote/6715)
**Author:** [@nazarijtipusak080](https://forum.xod.io/u/nazarijtipusak080)\
**Replies:** 2\
**Last updated:** [November 27, 2023, 7:24pm UTC](https://forum.xod.io/t/problem-with-ir-remote/6715 "2023-11-27T19:24:44Z")
I use the gweimer/ir-remote library for the project, when trying to find out the code of the “ir” button of the remote control, it turned out that with each press the code changes. Tried three remotes, as well as three …
---
## [Помогите вывести значение датчика dht11 на дисплей ssd1306](https://forum.xod.io/t/dht11-ssd1306/6714)
**Author:** [@lukich666](https://forum.xod.io/u/lukich666)\
**Replies:** 1\
**Last updated:** [November 23, 2023, 1:16am UTC](https://forum.xod.io/t/dht11-ssd1306/6714 "2023-11-23T01:16:19Z")
Помогите вывести значение датчика dht11 на дисплей ssd1306 ниже значений управления двигателями, данном проекте. cir222.xodball (36.7 KB)
---
## [Lcd 20x4 node text truncation](https://forum.xod.io/t/lcd-20x4-node-text-truncation/6713)
**Author:** [@mpkennedy58](https://forum.xod.io/u/mpkennedy58)\
**Replies:** 1\
**Last updated:** [November 22, 2023, 4:41am UTC](https://forum.xod.io/t/lcd-20x4-node-text-truncation/6713 "2023-11-22T04:41:57Z")
I am using this node: xod-dev/text-lcd/text-lcd-i2c-20x4 The display is performing like a 1604 display. That is, the last 4 characters do not show! I checked the node settings: All good. Please help. Thanks MK
---
## [Compiler hangs when using hardware uart-x output nodes on mega 2560 !?](https://forum.xod.io/t/compiler-hangs-when-using-hardware-uart-x-output-nodes-on-mega-2560/6651)
**Author:** [@davebowden1](https://forum.xod.io/u/davebowden1)\
**Replies:** 14\
**Last updated:** [September 20, 2023, 10:31pm UTC](https://forum.xod.io/t/compiler-hangs-when-using-hardware-uart-x-output-nodes-on-mega-2560/6651 "2023-09-20T22:31:16Z")
Compiler hangs when attempting to run Waylan-gps example 1…this had worked fine til about a week ago. I’ve tried uninstalling & reinstalling XOD ide to no avail. I have tried compiling the uart-1, uart-2, & uart-3 by t…
---
## [Is there a node for indexing](https://forum.xod.io/t/is-there-a-node-for-indexing/6648)
**Author:** [@g-p](https://forum.xod.io/u/g-p)\
**Replies:** 2\
**Last updated:** [September 18, 2023, 3:56pm UTC](https://forum.xod.io/t/is-there-a-node-for-indexing/6648 "2023-09-18T15:56:40Z")
Hi I am trying to resurrect an old 8 channel light string that I built for a Christmas display and controlled it with a C64 commodore. My plan is to cycle one nth node x number of times then take the reset pulse of the …
---
## [4x4 keypad with driver](https://forum.xod.io/t/4x4-keypad-with-driver/6646)
**Author:** [@g-p](https://forum.xod.io/u/g-p)\
**Replies:** 1\
**Last updated:** [September 14, 2023, 9:44pm UTC](https://forum.xod.io/t/4x4-keypad-with-driver/6646 "2023-09-14T21:44:05Z")
I am hoping some one here has come across this little board, I think it could be an I2C module for the keypad but am not sure. I can not seem to find anything on it, it came with the keypad in one of those 37 piece kit…
---
## [ Stepper Motor Control Problem?](https://forum.xod.io/t/stepper-motor-control-problem/6630)
**Author:** [@ninami23](https://forum.xod.io/u/ninami23)\
**Replies:** 1\
**Last updated:** [August 25, 2023, 2:31pm UTC](https://forum.xod.io/t/stepper-motor-control-problem/6630 "2023-08-25T14:31:19Z")
In the below link the one stepper motor was controlled …Can I control multiple stepper motor drivers from one controller??? https://www.oyostepper.com/goods-494-Stepper-Motor-for-3D-Printer-DIY-CNC-Robot-10-50-Degree-C-…
---
## [MIDI implementation](https://forum.xod.io/t/midi-implementation/208)
**Author:** [@dox](https://forum.xod.io/u/dox)\
**Replies:** 26\
**Last updated:** [August 19, 2023, 3:00pm UTC](https://forum.xod.io/t/midi-implementation/208 "2023-08-19T15:00:25Z")
@ awgrover: Because I am not familiar with C++ and Arduino programming I was looking for a solution to build flexible MIDI Controllers. Unfortunately no graphical user interface for Arduino supports MIDI Interfaces (Vis…
---
## [3 Phase Sine Wave](https://forum.xod.io/t/3-phase-sine-wave/1338)
**Author:** [@cesars](https://forum.xod.io/u/cesars)\
**Replies:** 6\
**Last updated:** [August 13, 2023, 8:01pm UTC](https://forum.xod.io/t/3-phase-sine-wave/1338 "2023-08-13T20:01:17Z")
Analog Three-Phase Sine Wave Generator in tests, soon upload video … PD: a little frustrated, works at low frequency :slightly\_frowning\_face:
---
## [I have made blink programme video](https://forum.xod.io/t/i-have-made-blink-programme-video/6616)
**Author:** [@sanjoy-roy345](https://forum.xod.io/u/sanjoy-roy345)\
**Replies:** 1\
**Last updated:** [August 10, 2023, 7:12am UTC](https://forum.xod.io/t/i-have-made-blink-programme-video/6616 "2023-08-10T07:12:22Z")
Please follow this link for blink programme video:
---
## [Ignition circuit again](https://forum.xod.io/t/ignition-circuit-again/6588)
**Author:** [@apsolucija](https://forum.xod.io/u/apsolucija)\
**Replies:** 25\
**Last updated:** [August 1, 2023, 2:12pm UTC](https://forum.xod.io/t/ignition-circuit-again/6588 "2023-08-01T14:12:55Z")
I put together this code and everything works fine, namely I found out that sometimes it happens that instead of 90 seconds it turns off as it should do another cycle or two, sometimes even three, is there some kind of s…
---
## [MCP23017 I2C I/O expansion](https://forum.xod.io/t/mcp23017-i2c-i-o-expansion/6604)
**Author:** [@mer-electrical](https://forum.xod.io/u/mer-electrical)\
**Replies:** 5\
**Last updated:** [July 25, 2023, 8:37pm UTC](https://forum.xod.io/t/mcp23017-i2c-i-o-expansion/6604 "2023-07-25T20:37:03Z")
Hi all, is there a node for using I2C input output expansion chips for example the MCP23017 as I can’t find one?
---
## [New member alert](https://forum.xod.io/t/new-member-alert/6602)
**Author:** [@mer-electrical](https://forum.xod.io/u/mer-electrical)\
**Replies:** 1\
**Last updated:** [July 17, 2023, 4:50pm UTC](https://forum.xod.io/t/new-member-alert/6602 "2023-07-17T16:50:37Z")
Hello all, I dont know how I’ve managed to miss XOD but now I’ve stumbled across it, read through the tutorial and watch the few YouTube videos out there I like what I see and hope the platform grows in popularity and ab…
---
## [Pubsub-mqtt limited publication](https://forum.xod.io/t/pubsub-mqtt-limited-publication/6592)
**Author:** [@manuelgonzalez-iot](https://forum.xod.io/u/manuelgonzalez-iot)\
**Replies:** 3\
**Last updated:** [July 9, 2023, 6:11pm UTC](https://forum.xod.io/t/pubsub-mqtt-limited-publication/6592 "2023-07-09T18:11:43Z")
Hello, I’m testing the example of bradzilla84 pubsub-mqtt. The problem comes when the messages arrive in a row from mqtt. If I send them very close together, the microcontroller freezes and does not respond. Programmed …
---
## [How serialize a json to mqtt-publish?](https://forum.xod.io/t/how-serialize-a-json-to-mqtt-publish/6590)
**Author:** [@manuelgonzalez-iot](https://forum.xod.io/u/manuelgonzalez-iot)\
**Replies:** 1\
**Last updated:** [July 3, 2023, 6:22pm UTC](https://forum.xod.io/t/how-serialize-a-json-to-mqtt-publish/6590 "2023-07-03T18:22:26Z")
StaticJsonDocument\<16\> doc; doc\[“reboot”\] = true; serializeJson(doc, output);
---
## [Adafruit Seesaw library](https://forum.xod.io/t/adafruit-seesaw-library/6587)
**Author:** [@idhoworth](https://forum.xod.io/u/idhoworth)\
**Replies:** 0\
**Last updated:** [July 2, 2023, 12:48pm UTC](https://forum.xod.io/t/adafruit-seesaw-library/6587 "2023-07-02T12:48:15Z")
Has anyone wrapped the Adafruit seesaw library to use a rotary encoder on 12c?
---
## [XOD Development](https://forum.xod.io/t/xod-development/6585)
**Author:** [@mgtf1956](https://forum.xod.io/u/mgtf1956)\
**Replies:** 0\
**Last updated:** [July 1, 2023, 1:04am UTC](https://forum.xod.io/t/xod-development/6585 "2023-07-01T01:04:57Z")
Following on from the discussion last year, how is the ongoing development of XOD proceeding?
---
## [Cloud Simulation not working](https://forum.xod.io/t/cloud-simulation-not-working/6565)
**Author:** [@mike-xod](https://forum.xod.io/u/mike-xod)\
**Replies:** 4\
**Last updated:** [May 29, 2023, 8:20am UTC](https://forum.xod.io/t/cloud-simulation-not-working/6565 "2023-05-29T08:20:56Z")
I have just heard about XOD recently and started getting to know it, but while still going through the tutorial, I cannot run the simulation. This is the Deployment message I receive: “Generating C++ code for simulatio…
[Previous page](https://forum.xod.io/c/uncategorized/1.md?no_subcategories=false&page=1)
[Next page](https://forum.xod.io/c/uncategorized/1.md?no_subcategories=false&page=3)